Accessing The Internet - Zte MF288 User Manual

NOTE:
You may need to input a password for the Wi-Fi connection. Please check the label on your
MF288 to get the default password.
5. After a few moments,
If you want to use WPS function to enable a Wi-Fi connection, please:
1.
Power on your device, and enable the Wi-Fi function on your device.
2. Please check that the WPS Setting on the WebUI Configuration page in enabled.
3.
Press the WPS button on your device to start the Wi-Fi Protected Setup authentication
process.
4.
Enable the WPS function on your client device.
5.
Follow the system prompts on your client to finish the connection process.

Accessing the Internet

After the client is connected to your device successfully, you can access the Internet in
the Automatic or Manual mode. The default mode is Automatic.
Mode
Automatic
Manual
6 Confidential and Proprietary Information of ZTE CORPORATION
the client will connect to your MF288.
Your device will connect to the Internet automatically.
1. Log in the WebUI configuration page.
ZTE MF288 User Guide
Operations