Starting The Appliance - Worcester GREENSTAR 12Ri Instruction Manual
Wall hung rsf gas fired condensing boiler for open vented and sealed central heating systems and indirect mains fed domestic hot water, this boiler is used with natural gas or lpg cat ii 2h3p type c13, c33 & c53
Hide thumbs
Also See for GREENSTAR 12Ri:
- Technical information (44 pages) ,
- Installation and servicing instructions (68 pages) ,
- User manual (53 pages)
Table of Contents
Advertisement
A
D
28
STARTING THE APPLIANCE
B
C
STARTING THE APPLIANCE
IMPORTANT: Never run the appliance
when the appliance/system is empty or
partially filled.
Switching the appliance on/off:
1
2
3
4
CAUTION: DO NOT PRESS POWER
INDICATOR (B) TO RESET BOILER.
MIN
MAX
RESET
INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR Ri
Turn on mains power supply
Turn on any external controls
Set the thermostatic radiator controls to
maximum temperature
Set the clock/programmer to continuously
ON and the room thermostat to maximum
temperature
Turn control (A) from 0 (off position) to I
(on position), after 2 seconds the power
on indicator (B) illuminates BLUE.
Turn the boiler thermostat control (C) to
maximum. The burner on indicator (D)
illuminates GREEN.
If the boiler fails to light and the boiler
goes to flame lock-out the BLUE power
indicator (B) will flash.
To reset the lockout turn the boiler
thermostat control to minimum, then
past minimum where the control will
click at reset position, wait 5 seconds
then turn to maximum. The boiler
will be reset.
8 716 115 168a (06/2008)
Hide quick links:
Advertisement
Table of Contents
