Table of Contents
Advertisement
At this point, the user must choose whether to
If the result is rejected, the user is given the option
to repeat the previous test (Test) or finish making
measurements (by pressing Exit, which brings back
to the Measure Peak Force Menu).
Similarly, if the result is Accepted, the data are stored in GSM's memory and the user is
given the option to finish making measurements (Exit) or do another test (Test).
If the
Maximum measurement time
during the test, the test is terminated automatically.
Pressing
Begin again
the first Measure Peak Force screen, while
test
allows the user to repeat the current test.
From the Measure Peak Force screen, press Next option to View Acquired Data.
4.4.2
View Acquired Data
Selecting View Acquired Data from the Measure menu and pressing
plays briefly the total number of stored measurements, and then a screen similar to:
4.4.3
Transfer Data to PC
This option allows data stored in GSM's memory to be transferred to a PC. It requires
that GSM is connected to a PC via the USB cable supplied and that the PC is running the
DCA software provided with the instrument. Detailed operation is covered later in this
manual under PC Software, see paragraph 6.
If this option is selected when the instrument is not connected to a PC which is running
appropriate software, GSM displays
to the first option on the Measure menu.
4.4.4
Change Max Force
The next option enables the user to select the maximum force, among the available
ranges:
0-100gf
0-500gf
0-1500gf
is exceeded
effectively returns the user to
Which shows the first stored test (No. 1).
Press
the example),
one being displayed, or
the Measure menu (i.e. measure peak force).
PC not available
Reject
or
Accept
Repeat
Next
to view the next stored test (No. 2, in
Previous
Exit
for a few seconds and then returns
47200 Instruction Manual (Rev. 1)
the results of the test.
Select this
to view the test before the
to return to option 1 of
Page 13
dis-
Advertisement
Table of Contents
