Table of Contents
Advertisement
2.2.1
Grasping Grids
Our Grip Strength Meter was originally designed to test the forelimbs.
An integrated measurement of the four
limbs can also be obtained by using the
optional
47200-325
Measuring the hind limbs with the standard
T-bar or trapeze attachment pieces that
come with the machine, is hardly feasible;
the grid 47200-325 is useful also in this
case.
An alternative model has been recently
developed, 47200-326, which a "blind"
side.
The new grid makes it easier to measure
the hind limbs, specifically compared to the
T or the trapeze.
Both grids are included with the standard
package.
INSTALLATION
3
3.1
Unpacking & Preliminary Check
Check the contents of the shipment for completeness, packing list to hand, and visually
inspect the instrument as soon you take it out of the packaging. Use the supplied Check
List.
If the instrument is damaged, inform the carrier immediately, notifying our company. If af-
ter having tested it, the GSM fails to meet rated performances, please contact our after
sales service, see paragraph 7.3-Customer Support.
grid available.
Figure 3 "Grasping-Grids"
Protect the environment!
Dispose of packaging properly, according to existing and ap-
plicable waste management rules and regulations.
47200 Instruction Manual (Rev. 1)
Page 5
Advertisement
Table of Contents
