Table of Contents
Advertisement
A caption on the top right of the window reminds the Transducer Max Force, as set in the
instrument configuration menu.
6.3.2
Info Panel
The Info Panel indicates the ac-
tion in progress (in these exam-
ples TEST MONITORING, and
WAITING) and additional infor-
mation regarding the action
In addition, the panel shows the
current Firmware revision.
During the data Analysis, the
panel shows specific data related
to the selected file
6.3.3
Device Control Panel
From the Control Panel it is possible to start
the software (USE DEVICE) or to discon-
nect it (DISCONNECT).
The current value and the overall peak are
displayed in the related boxes, together with
the time.
6.3.4
Analysis Control Panel and Notes Tool
All data files are stored in the folder C:\UB Data\ in sub-folders which are named accord-
ing to the date of data transfer, in the format YYMMDD; for example, data transferred on
rd
July 23
, 2013 will be found in the folder C:\UB Data\130723\. All the trials conducted in
the same experiment are saved in the same file.
Individual files, containing the downloaded data, are named automatically according to
the date, followed by two letters which progress from AA, AB, AC... through to ZZ.
For example, the third set of data downloaded on July 23
file:
C:\UB Data13\090723AC.PAM
where "PAM" is the extension of this proprietary software.
47200 Instruction Manual (Rev. 1)
rd
, 2013 would be stored in the
Page 21
Advertisement
Table of Contents
