Usb Results Export; Ethernet (Lan) Data Load And Retrieve - UGO BASILE 37240 User Manual

6.5.2. USB results export

Once data have been saved into the Plethysmometer internal memory, they can
be transferred into a USB pen drive by simply plugging it into the upper USB port
and tapping USB STORAGE followed by Export results
The USB Storage Window
Important: data can be saved into the provided USB pen or into any other USB
pen. However, if a non-Ugo Basile USB pen drive is used, make sure it is formatted
as FAT32 and equal or smaller than 16GB.
Data will be automatically saved as .CSV files, which can be opened in Microsoft
Excel®, with comma separated format.

6.5.3. Ethernet (LAN) data load and retrieve

Using the provided Ethernet cable, it is possible to load experiment data to the
Plethysmometer as well as sending the experimental data results directly to a PC,
without the need to use the USB drive as a transfer data unit. This feature can be
useful for example when lab rules does not permit the use of a USB pen-drive for
security reasons.
Requirements:
To use this feature, it must be ensured that:
• The device must be plugged from the front RJ45 connector to any LAN socket
or directly to the LAN computer connector (automatic cross connection);
• A Windows PC or Mac computer with a running web browser.
• The Network set-up into the device is correctly set.
Note: If the Plethysmometer is plugged into laboratory LAN and the facility provides a
WiFi connection at the same LAN, the user can also use a mobile device such a tablet
or smart phone to browse Plethysmometer data.
How to connect the PC to the Plethysmometer device.
Open a web browser on the PC, prompt the Plethysmometer device IP address
and press ENTER (IP address can be seen on the device screen pressing the UB
logo on the top of the main page, which takes to the info page, find the number
after the text IP: on the screen and take note of it: e.g. 10.0.2.163)
Back to Contents 25
Operation