Table of Contents
Advertisement
MAINTENANCE
7
While any service of the instrument ought to be carried out by Ugo Basile personnel or by
qualified personnel authorized by UGO BASILE organization, this section of the instruc-
tion manuals describes normal maintenance procedures which can be carried out at your
facility.
7.1
Charging the Internal Battery
The GSM battery is charged automatically when external power is supplied to its minia-
ture USB 'B' socket, either from a PC or from a suitable USB power adapter.
The instrument is dispatched from the factory with a fully charged battery. However, it is
recommended that the battery is charged before initial use. See also paragraph 5.1-
Battery Low Warning.
7.2
Long Inactivity
The instrument does not require any particular maintenance after long inactivity.
7.3
Customer Support
For any further information you may desire concerning the use and/or maintenance of the
GSM, please do not hesitate to contact our service department (or our local distributor)
either directly of via our support page
UGO BASILE s.r.l.
Via G. Di Vittorio 2
21036 GEMONIO – Varese, ITALY
Phone : +39 0332 744574
service@ugobasile.com
logistics@ugobasile.com
sales@ugobasile.com
Before sending any instrument to our factory for repair, please contact our logistics
department to obtain a return authorization number (RMA) and shipping/packing instruc-
tions.
We may not be held responsible for damages during transport due to poor packing;
whenever possible, please use the original packing.
http://www.ugobasile.com/support.html
47200 Instruction Manual (Rev. 1)
:
Page 26
Advertisement
Table of Contents
