Table of Contents
Advertisement
Do not apply more than 1500gf
Excessive force can permanently damage the transducer!
For as long as the force is applied steadily, the Force value will indicate the pulling force
in gf and the Time remaining will indicate the number of seconds left to complete the
test.
Once the animal releases the grasping tool, the
screen changes, indicating the peak force, the total
testing time, and the time at which the peak force
occurred:
Press
Accept
(or Reject) and the screen changes
to:
Press
Exit
to return to the Measure menu:
By pressing
Next option
quired Data".
Press
Select this
in 1-2 seconds.
The display shows the most relevant information for
each measurement:
Date and Time
Progressive number of the measurement
Measurement Mode (Automatic or Foot Pedal)
Peak Force
Peak Time
The measurements can be browsed by simply pressing
Press
Exit
to return to the main menu.
Press the
ON/OFF
you will reach "View Ac-
and the stored data will be loaded
button to switch GSM OFF.
47200 Instruction Manual (Rev. 1)
Next
or Previous.
Page 9
Advertisement
Table of Contents
