Table of Contents
Advertisement
Input Selection
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point ed buttons to select Input and
then press the Point 8 or the SELECT button.
Use the Point ed buttons to select the desired input
and then press the Point 8 button to access the
submenu items.
Use the Point ed buttons to select the desired
source and then press the SELECT button.
WHEN SELECTING INPUT 1 (COMPUTER INPUT
TERMINALS )
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
RGB(Scart)
When scart video equipment is connected to the INPUT 1
(ANALOG) terminal, select RGB (Scart).
RGB(PC digital)
When your computer is connected to INPU T 1 (DIGITAL)
terminal, select RGB (PC digital).
RGB(AV HDCP)
If the HDCP-compatible signal source is connected to the
INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).
HDMI
When the video signal is connected to the HDMI terminal,
select HDMI.
WHEN SELECTING INPUT (5 BNC INPUT jACKS )
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
y, Pb/Cb, Pr/Cr
When the video input signal is connected
to the Y, Pb/Cb, Pr/Cr jacks, select Y, Pb/
Cb, Pr/Cr.
Video
When the video input signal is connected
to the VIDEO jack, select Video.
S-Video
When the video input signal is connected to
the S-VIDEO jack, select S-Video.
Note:
✔
• When the video input signal is connected to the Y-Pb/Cb-Pr/
Cr jacks, Y,Pb/Cb,Pr/Cr takes precedence of RGB.
• Y,Pb/Cb,Pr/Cr input can accept the component signal and
the analog RGB signal. When analog RGB signal is not
recognized in Y,Pb/Cb,Pr/Cr input source, set to RGB input
manually.
4
Video Input Source Selection
INPUT 1 MENU
INPUT MENU
Advertisement
Table of Contents
