Operating With Remote Control - Sanyo PLC HF10000L Owner's Manual

Sanyo projector user manual

Hide thumbs

Table Of Contents

Table of Contents

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons

enables you to make the desired operation quickly without calling up the On-Screen Menu.

SHUTTER button

See page 28 for details.

MENU buttons

Press the MENU button to show the main menu. Press the

button again to hide the menu.

LENS SHIFT button

See page 28 for details.

ZOOM buttons

Press the ZOOM buttons on the remote control to zoom in

and out the image.

D.ZOOM button

Press the D.ZOOM button on the remote control to enter to

the Digital zoom +/– mode. See page 44 for details.

SCREEN button

Press the SCREEN button on the remote control to select

the desired screen size. The selected screen size symbol

appears on the screen for 4 seconds. See pages 43 to 45

and 51 to 52 for details.

Press and hold the SCREEN button for more than 5 seconds

to return all the screen size adjustment setting to the factory

default setting.

AUTO PC button

Press the AUTO PC button on the remote control to operate

the Auto PC adj. function. The computer screen adjustment

can be done easily by pressing this button. See page 36 for

details.

IMAGE ADjUST button

Press the IMAGE ADJUST button to show the IMAGE

ADJUST menu. Press this button again to hide the menu.

FOCUS buttons

Press the FOCUS buttons on the remote control to adjust

focus of the image.

INFO. button

Press the INFO. button to confirm the current settings of the

projector and the signals being transmitted to the projector.

Use the Point 7 8 buttons or INFO. button to toggle back

and forth between the current and next Information menus

and the cancellation of menu display.

Note:

✔

• The H-sync freq. and V-sync freq. values shown in the menu list

may be different from the actual values.

• SERIAL NO. is used to service the projector.