Sanyo PLC HF10000L Owner's Manual page 30

Basic Operation
LIGHT button
Press the LIGHT button to turn on/off Keypad backlight.
FREEZE button
Press the FREEZE button on the remote control to
freeze the picture on the screen. To cancel the FREEZE
function, press the FREEZE button again or press any
other button.
Fig.1 will appear when the Freeze function is working.
Fig.1
P-TIMER button
Press the P-TIMER button on the remote control to
operate the Count up/Count down function. Refer to
p.68 for detail of Setting for the P-timer function for
a few seconds. To stop the count time, press the P-
TIMER button. To cancel the P-timer function, press
and hold the P-TIMER button.
FILTER button
Press and hold the FILTER button for more than five
seconds to operate electrically operated filter to replace
the filter.
Note
✔
• The filter cannot be rewound.
• When the filter is replaced, the total accumulated time
of the filter use is automatically set to 0.
IMAGE SEL. button
Press the IMAGE SEL. button on the remote control to
select a desired image level of the screen.
For more detail, see pp.39, 47 .
KEySTONE button
See page 31 for details.
PIP button
Press the PIP button on the remote control several
times until the desired mode of Picture in Picture
appears. Each user mode (User 1-5) appears only
when it has stored data.
Press and hold the PIP button for more than 3
seconds to display the setting dialog box of Picture
in Picture. See pages 55-56 for details of Picture in
Picture function.
0
Remote Control
FREEZE button
P-TIMER button
FILTER button
Note
✔
See the previous page for the description of other buttons.
User 1 of PIP (example)
User 2 of PIP (example)
Main picture
LIGHT
button
IMAGE SEL.
button
KEYSTONE
button
PIP button
Sub
picture
Main
picture
Sub
picture