Connecting To A Computer - Sanyo PDG-DWL2500 Owner's Manual

Installation
Cables used for connection
• VGA cables (Mini D-sub 15 pin) *
• Audio cables
• HDMI-DVI cable
(*One cable is supplied; other cables are not supplied with the projector.)
VGA
cable
COMPUTER IN 1 /
COMPONENT IN
4Note:
• Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/COMPONENT IN
terminal as input.
• When the cable is of the longer variety, it is advisable to
use the COMPUTER IN 1/COMPONENT IN and not the
COMPUTER IN 2 /MONITOR OUT.
• Analog RGB and component signals can be output from the
COMPUTER IN 2/MONITOR OUT terminal when using the
COMPUTER IN 2/MONITOR OUT terminal as output.
• When the AUDIO OUT is plugged-in, the projector's built-in
speaker is not available.
16

Connecting to a Computer

Monitor Output
Monitor Audio
or
Output Output
Monitor Input
Audio VGA
cable cable
(stereo)
COMPUTER/
COMPUTER IN 2/
COMPONENT
MONITOR OUT
AUDIO IN
This terminal is switch-
able. Set up the terminal
as COMPUTER IN 2 or
MONITOR OUT (P. 56).
External Audio Equipment
DVI
Audio
Output
Input
VGA HDMI-DVI
cable cable
AUDIO OUT
HDMI
(stereo)
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.
Audio cable
(stereo)