Input Source Selection (Component, Scart, Hdmi) - Sanyo PDG-DWL2500 Owner's Manual

Video Input

Input Source Selection (Component, Scart, HDMI)

Direct Operation
Choose Computer 1(Component) or Computer 1(Scart)
by pressing the the COMPONENT or COMPUTER 1 button
on the remote control; choose HDMI by pressing the HDMI
button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point ed buttons to select Input and
then press the Point 8 or the SELECT button.
2
Use the Point ed buttons to select Computer 1 and
then press the Point 8 button; use the Point ed
buttons to select Component or RGB(Scart) and then
press the SELECT button.
OR
Use the Point ed buttons to select HDMI, and then
press the SELECT button;
When the input source is coming from video
Component
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
When the video signal is connected to the
HDMI
HDMI terminal, select HDMI.
4Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.51).
2
Remote Control
COMPUTER 1 button
HDMI button
COMPONENT button
Input Menu
Computer 1 (RGB)
Computer 1 (Scart)
HDMI
Computer 1
(Component)