Connecting To Component Video Equipment - Sanyo PDG-DWL2500 Owner's Manual

Installation
Cables used for connection
• Audio cables
• Scart-VGA cable
• Component cable
• Component-VGA cable
• HDMI cable
(Cables are not supplied with this projector.)
Component Video
Output
(Y, Pb/Cb, Pr/Cr)
Component
cable
Component-
VGA cable
COMPUTER IN 1/
COMPONENT IN
4Note:
• When the AUDIO OUT is plugged-in, the projector's built-in
speaker is not available.
• See page 78 for ordering optional cables.
18

Connecting to Component Video Equipment

RGB Scart
Audio Output
21-pin Output
Audio cable
Scart-VGA
(stereo)
cable
COMPUTER 1/
COMPONENT
AUDIO IN
Monitor Output Signal Table
Input Terminal
COMPUTER 1/
D-sub15
COMPONENT
COMPUTER 2 D-sub15 RGB
HDMI HDMI
S-VIDEO
DIN-4
VIDEO
RCA
A cable with one end D-sub 15 and the other end (Black box)
]
compatible with each equipment is necessary.
External Audio Equipment
HDMI Output
Refer to
the Monitor
Output Sig-
nal Table.
HDMI
cable
COMPUTER IN 2/
HDMI
MONITOR OUT
Monitor Out
RGB (PC analog) YES
Y, Pb/Cb, Pr/Cr YES
RGB (SCART) NO
YES
HDMI NO
S-video NO
Video NO
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.
Cable
]