Table of Contents
Advertisement
Operation
Why can't I change the controls in the setting page with web browser?
Q
Please make sure the projector is turned on. If it is in the standby mode, the
A
setting is not effective to the projector. To control the projector with a web
browser, the projector must be in the powered-on condition. Also, projectors
registered for multi-control cannot have any controls changed if they are in
standby mode. But timer and clock settings are always effective, even for pro-
jectors in standby mode.
Why does it sometimes take a lot of time to complete the page dis-
Q
play?
The display speed of the page depends on the network environment in which
A
both the projector and computer are placed. It may take much time to complete
the page display if network traffic is heavy. Please consult your network admin-
istrator. By changing the preference of your web browser to "not show pic-
tures", you may have page display more quickly at the heavy network traffic.
Please see the browser's on-line help for further information. Also you can
select the Text mode for displaying pages quickly (
I use many of the projectors in the network. How can I use names of
Q
the projectors to recognize each projector instead of IP addresses?
You can manage the projectors with nicknames instead of the IP address.
A
Please see chapter "Controlling the Multi-Projectors" for further information
(
p.79).
By registering the projector name and IP address with the DNS server, it can be
accessed with the nickname from the any computer referred to the DNS serv-
er. Please consult your network administrator (
How many numbers of the E-mail address can I register in the E-mail
Q
setting page.
You can register up to 10 addresses.
A
p.26).
p.32, 81).
Network Unit
OWNER'S MANUAL
FAQ
107
Advertisement
Table of Contents
