Table of Contents
Advertisement
Chapter 8 Appendix
Web browser setting
This product is designed to enable the projector to be set up and controlled from an
Internet web browser. Depending on the preference settings of the web browser,
some control functions may not be available. Please make sure that the following
functions are set up properly in the web browser.
Active Script/JavaScript enable
There are some control items used with the
JavaScript function in the setting pages. If the web
browser is set not to use this JavaScript function, it
may not control the projector properly. In this case,
the following warning message will be displayed on
the top of the page. To enable the JavaScript, please
see further instructions on the next page.
Proxy setting
In some cases, your web browser is set up to use the proxy server for the internet or
intranet connection. In this case, when you install this product into the local network,
you should set up the proxy setting of web browser preference correctly. Especially
when connecting the projector and computer with a UTP cross cable directly, or
when the network does not provide the proxy server, make sure that "not use proxy
server" is set up in your web browser preference. To set up the proxy setting, please
see further instructions on next page.
There are various ways to change your browser preferences depending on the version or
applications. Please see the setting instructions on next page for example and also refer to
on-line help of your web browser.
96
Advertisement
Table of Contents
