Table of Contents
Advertisement
4
Condition selection for sending alert message
Check the condition items under which alert messages will be sent and click Set
button.
A free message can be sent
when the lamp use time reach-
es the preselected lamp use
time.
Check this condition and enter
a setting time. Type a free
message
on
Message" text box and the
click Set button.
* The length of message should
be less than 256 characters.
* The lamp use time can be set 0
to 9999 hours.
If you check "When a connection error occurs during an auto play.", the projector
sends an alert message when the error occurs while the projector projects images
automatically by using the Network Viewer function (
contents, please see item "Auto display setting and control page[3]". (
Examples: Type and contents of alert mail
When the projector has an abnormality, the following alert messages are sent to the
registered E-mail address according to your selected condition. Administrator or user
can take an efficient action quickly by receiving this message. This is very useful to
maintain and service the projector.
The following are examples of received messages.
When the internal temperature is too high:
TITLE: Message from projector
01-03-2003 00:59
Projector Model Name: XP50/55
TCP/IP: 192.168.1.201 Projector Name: myProjector
It sends you following message.
*The Projector lamp is turned off, because internal projector temperature is too
high.
Wait Temperature Warning Indicator turned off,turn the Projector on again.
If the Indicator continues to flash,check the air filter for dust accumulation.
[A] 36.5 Degree [B] 46.5 Degree [C] 58.2 degree
Temperature of Sensor C is too high.
The Network Unit let users know the information which thermal sensor [A], [B] or [C]
inside the projector detected the abnormal temperature risen and so the projector was
turned off. Please refer to item "Check the status of projector" for the location of the
sensors [A], [B] and [C], and temperature (
projector for further details.
"Attached
p.72). For the detail of error
p.39). Also see the owner's manual of the
E-mail Setting
p.74)
35
Network Unit
OWNER'S MANUAL
Advertisement
Table of Contents
