Install two "AA" batteries (not supplied)
as shown in Fig. 3. Observe proper
If you are not going to use the unit
with batteries for one month or
more, remove the batteries.
When the BATT/OPR indicator (M-1110C only) does not light
during operation or is lit dimly, replace the batteries.
When replacing the batteries, use two new batteries of
the same type. Do not mix a used battery with a new
one or mix different types of batteries.
SPENT OR DISCHARGED BATTERIES MUST BE RE-
CYCLED OR DISPOSED OF PROPERLY IN COMPLI-
ANCE WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LO-
CAL COUNTY SOLID WASTE AUTHORITY.
Install the rechargeable battery (SANYO
NBP-30B, not supplied) as shown in Fig.
4. Connect the AC adaptor. The battery
fully charged approximately 8 hours af-
ter the AC adaptor is connected.
Do not charged continuously for 24
hours or more.