Banner Q25 Quick Start Manual

Q25 DC Sensors
Quick Start Guide
Self-Contained, DC-Operated Sensors
For additional technical information about this product, including complete instructions, dimensions, accessories, and
specifications, see http://www.bannerengineering.com
Models
Model 1
Sensing Mode
Q256E
Q25SN6R
OPPOSED
Q25SP6R
Q25SN6LP
P
Q25SP6LP
POLAR RETRO
Q25SN6FF25
Q25SP6FF25
Q25SN6FF50
Q25SP6FF50
FIXED-FIELD
Q25SN6FF100
Q25SP6FF100

Wiring Diagrams

Cabled Emitters
bn
bu
QD Emitters
bn
+
10 - 30V dc
bu
–
bk
no connection
wh
1 Standard 2 m (6.5 ft) cable models are listed.
• 9 m (30 ft) cable: add suffix "W/30" (for example, Q256E W/30).
• 4-pin Euro-style QD models: add suffix "Q" (for example, Q256EQ). A model with a QD connector requires a mating cable.
Original Document
116165 Rev. A
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing
so could lead to serious injury or death. This device does not include the self-
checking redundant circuitry necessary to allow its use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
NPN (Sinking) Outputs Standard Hookup
bn
+ bu
10-30V dc
bk
–
wh
NPN (Sinking) Outputs Alarm Hookup
bn
bu
bk
wh
and search 121518.
Output Range
—
NPN 20 m (65.6 ft)
PNP
NPN
2 m (6.6 ft)
PNP
NPN
25 mm (0.9 in) cutoff
PNP
NPN
50 mm (1.9 in) cutoff
PNP
NPN
100 mm (3.9 in) cutoff
PNP
+
10 - 30V dc
–
Load
Load
–
10 - 30V dc
+
Load
Alarm
28 January 2016
LED
Infrared, 950 nm
Visible red, 680 nm
Infrared, 880 nm
PNP (Sourcing) Outputs Standard Hookup
bn
+
10 - 30V dc
bu
–
bk
Load
wh
Load
PNP (Sourcing) Outputs Alarm Hookup
bn
–
10 - 30V dc
bu
+
bk
Load
wh
Alarm
116165