Table of Contents
Advertisement
Operation
The VC-Feeder automatically detects whether it is receiving P3 or
DMX/RDM data and uses the commands it receives to drive the LED
display devices that are connected to it.
Ambient temperatures
The VC-Feeder can be operated at ambient temperatures from -20° C
(-4° F) to 55° C (131° F). Do not operate it outside this temperature range.
P3 video display
You can display video on the LED-based devices connected to each VC-
Feeder by sending a video data signal from a Martin P3™ system
controller over the data link.
Displaying video on a VC installation is managed from the P3 system
controller. See the P3 controller manual for details.
DMX control
If the display devices connected to the VC-Feeder have been set up with
individual DMX addresses, each device can be controlled as an individual
pixel using DMX.
If a string of display devices connected to the VC-Feeder has been set up
so that the devices share the same DMX address, the devices will behave
identically and the string can be controlled as one unit (one long pixel)
using DMX.
Operation
21
Advertisement
Table of Contents
