Before Operation; Common Operation - Sanyo DWM-3500 Instruction Manual

Common Operation

POWER
REC CHANNEL EJECT
VIDEO IN L-AUDIO IN-R
Turning the power on and off
Press [POWER] to turn the power on.
(After connecting the power cord, when you press [POWER] for
the first time, the volume-reset feature automatically sets the
initial volume level.)
When the power cord is connected to the AC outlet, the unit will
respond to commands from the remote control.
To turn the power off, press [POWER] again.
Selecting the source
Remote control operation
Press [VCR] to select the "VCR" function.
Press [DVD] to select the "DVD" function.
Press [AM/FM] to select the "Tuner" function.
Press [INPUT] repeatedly in the "VCR" function to select the
external source connected to AUDIO/VIDEO IN jacks on the
front panel or original source.
Notes:
• When the source is selected the "DVD" or "Tuner" function,
you cannot use [INPUT] button.
• When the source selection is changed to the "Tuner" function,
disc and tape playback automatically stops.
Front panel operation
Press [VCR/DVD] repeatedly to select the "VCR" or "DVD"
function.
Press [AM/FM] to select the "Tuner" function.
Adjusting the volume
Rotate [VOLUME] on the front panel (or press [VOLUME] + or –
on the remote control). The volume level appears on the FL
display (Vol 0 ~ Vol 40).
Note:
Set the TV's built-in speaker volume to minimum.
2B80201A [E] P17-26 20

BEFORE OPERATION

VCR/DVD AM/FM VOLUME OPEN/CLOSE
STOP PLAY
a
Adjusting the bass, treble and speaker level
1. Press [SOUND].
2. Press [ENTER] repeatedly to select the desired sound mode.
3. Press [4] or [5] to adjust the sound level.
4. Repeat steps 2 ~ 3 for another sound mode.
•
Bass boost system
Press [BASS BOOST].
"BA" appears on the FL display.
Press the button repeatedly to select the bass boost effect ON or
OFF.
BA ON v BA OFF v BA ON...
-E20-
"BA" appears on the FL display.
Each time [ENTER] is pressed, the sound mode changes as
follows:
BA (Bass) v TR (Treble) v FL (Front left speaker) v
C (Center speaker) v FR (Front right speaker) v
SR (Surround right speaker) v SL (Surround left speaker)
v SU (Subwoofer) v BA (Bass)...
BA/TR: "+5" ~ "–5".
FL/FR: "0" ~ "–10".
C/SR/SL/SU: "+10" ~ "–10".
You can also use the menu screen to adjust the speaker
level. See "Adjusting the Speaker and Subwoofer Level" on
page E22.
24/2/03, 7:13 PM
4
5