Before Operation - Sanyo DC-TS760 Instruction Manual

This instruction manual explains the various functions of this unit using the remote control.
The buttons on the main unit perform similar functions to similarly marked buttons on the remote control.
Turning the power on and off
Press the z/ON button. "HELLO" appears briefly on the display. (After
connecting the mains lead, when you press the z/ON button for the first
time, the volume-reset feature automatically sets the initial volume level.)
To turn the power off, press the z/ON button again. "GOOD-BYE" appears
briefly.
- When the mains lead is connected to the AC outlet, the unit will
respond to commands from the remote control.
Direct start function
If the following buttons are pressed when the unit is in standby, the unit
turns on automatically and the selected function is activated.
Remote control a (Play), TUNE/BAND, OPEN/CLOSE
Main unit
a, q
Selecting the function
Press the FUNCTION button to select the desired function. Each time the
button is pressed, the display changes as follows:
DVD/CD v TV v VIDEO v FM TUNER v AM TUNER v . . .
- When the function selection is changed, disc play is automatically
stopped.
Adjusting the volume
Press the "+" or "–" VOLUME button (or turn the VOLUME control on the
main unit). The volume level appears on the display (VOL 0 ~ VOL MAX).
To reduce the volume temporarily
Press the MUTE button. "MUTE" blinks on the display. To restore the
previous volume setting, press the MUTE button again.

BEFORE OPERATION

Selecting the sound mode
1. Press the SOUND button repeatedly to select the desired sound mode
("BASS", "TREBLE", "CINE":Cinema or "QS":Q-Surround).
2. Press the button as desired.
Sound mode Press
BASS 4 or 5
TREBLE 4 or 5
CINE ENTER
QS ENTER
Note for "CINE":
When enjoying a DVD disc with the volume set low at night, select this
mode. It enhances spoken lines making speech clearer.
3. Repeat steps 1 - 2 for another sound mode.
4. Press the SOUND button repeatedly to close the display.
Bass boost system
Press the BASS button to select the desired bass boost effect.
BOOST v BASS OFF v NORMAL . . .
Adjusting the display brightness
While pressing the n button on the main unit, press the ON SCREEN
button on the remote control.
DIMMER 1 v DIMMER 2 v DIMMER 0 . . .
Display change
"+5" ~ "–5"
"+5" ~ "–5"
"ON" or "OFF"
"LOW" or "HI"
10