Setting the Video Channel
To view playback of a recorded tape or DVD disc, or to watch a
program selected by the VCR's channel selector, the TV must be
set to channel 3 or 4 (video channel).
When a TV is connected with the 75 ohm coaxial cable only.
1
1. Press [POWER] to turn on the unit.
2. Press [VCR] to select the VCR mode.
The VCR indicator on the front panel will light.
3. Set the channel selector switch on the rear panel to 3 CH or 4
CH.
OUTPUT
DVD/VCR OUTPUT
COMPONENT
Y
VIDEO
P
B
L
AUDIO
P
R
R
4. Turn ON the TV and set to channel 3 or 4 to correspond with
the channel selected in step 3.
5. Press [TV/VCR] to select the VCR position.
"VCR" will appear on the FL display.
6. Select any channel to receive a TV station in your area.
The channel number will appear on the screen for
approximately 4 seconds.
For a push-button TV tuner
If channel 3 or 4 corresponding to the video channel cannot be
tuned on your TV, proceed as follows: set the channel selector
switch on the main unit's rear panel and the TV to 3 CH or 4 CH,
play back a prerecorded tape and tune the TV to receive a sharp
color picture from the video cassette recorder. Refer to your TV
owner's manual for details.
2B80201A [E] P17-26
24
2
5
VHF/UHF
AM LOOP
IN
FM 75
(
ANT
)
AUDIO OUT
(6–CHANNEL)
OUT
3
4
(
TV
)
CH
CH
Setting the Language
You can choose from three different languages (English, Spanish,
and French) for the on-screen displays.
ENTER
1. Press [SETUP/MENU].
If you use the unit for the first time and press [SETUP/
MENU], instead of the main menu screen below the "SYSTEM
SETUP" menu screen in step 3 may appear.
MENU
TIMER REC SET
ON
OFF
AUTO REPEAT
SAP
ON
OFF
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
4/5/ENTER/MENU
2. Press [4] or [5] to select "SYSTEM SETUP", then press
[ENTER].
3. Press [4] or [5] to select "LANGUAGE/IDIOMA/LANGUE",
then press [ENTER].
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON
OFF
ON
OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
4/5/ENTER/MENU
4. Press [4] or [5] to select the desired language: English
(ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS),
then press [ENTER].
4/5/ENTER/MENU
5. Press [SETUP/MENU] until the menu screen is cleared.
Notes:
•
Both the VCR and the DVD have their own menu (see page
E56).
•
If no buttons are pressed for more than 60 seconds, the
MENU screen will return to normal TV-operation automatically.
-E24-
24/2/03, 7:14 PM
1, 5
4,5