Random Playback [CD] [MP3] [WMA] [JPEG]
1
1. Press [PLAY MODE] while holding [SHIFT] down during
playback or stop mode.
The "Play Mode" screen ("Play Mode" and "Repeat") appears.
Play Mode
Off
Repeat
Off
2. Press [a] to select "Random".
Play Mode
Random
Repeat
Off
3. Press [a] to start Random Playback.
In case of Random Playback of JPEG file, press [e] to proceed
the Random playback.
Note:
To stop Random Playback completely, select "Off" in step 2.
Programmed Playback [CD] [MP3] [WMA] [JPEG]
Up to 12 selections can be programmed.
1
1
6
7
Programming procedure
1. Press [PLAY MODE] while holding [SHIFT] down in the stop
mode.
The "Play Mode" screen ("Play Mode" and "Repeat") appears.
Play Mode
Off
Repeat
Off
2. Press [a] to select "Program".
The "Program" screen appears.
Play Mode
Program
Repeat
Off
1 ---
4 ---
7 ---
10 ---
2 ---
5 ---
8 ---
11 ---
3 ---
6 ---
9 ---
12 ---
Clear
Program Playback
2B80201A [E] P38-49
47
3. Press the number buttons to select the track number.
Example:
To select Track No.3, press [3].
To select Track No.10, press [1], then [0].
To select Track No.24, press [2], then [4].
Notes:
•
If you make a mistake, press [CLEAR/CANCEL].
•
To quit the "Play Mode" screen, press [PLAY MODE]
while holding [SHIFT] down.
4. Press [5] to move the highlighted box down.
2
Example:
Play Mode
3
Repeat
1 9--
2 ---
3 ---
Clear
5. Repeat steps 3 ~ 4 above to select another track.
6. Press [4], [5], [b] or [a] to select "Program Playback" on the
TV screen.
7. Press [ENTER].
Program playback starts in the programmed order.
In case of Program Playback of JPEG file, press [e] to
proceed the Program Playback.
To return to normal playback, press [PLAY MODE] while
holding [SHIFT] down and select Play Mode "Off".
•
The program is canceled when you open the disc tray or
turn the power off.
To clear the program one by one
1. Repeat the steps 1 ~ 2 as described in "Programming
procedure" to open the "Program" screen.
2. Press [4], [5], [b] or [a] to select the track number.
3. Press [CLEAR/CANCEL].
3
To clear all the programs
1. Repeat the steps 1 ~ 2 as described in "Programming
procedure" to open the "Program" screen.
CLEAR/
2. Press [4], [5], [b] or [a] to select "Clear".
CANCEL
3. Press [ENTER].
To change the program
2
1. Repeat the steps 1 ~ 2 as described in "Programming
4
procedure" to open the "Program" screen.
2. Press [4], [5], [b] or [a] to select the track number.
3. Press the number buttons to select the track number to be
replaced.
Note:
To quit the "Play Mode" screen, press [PLAY MODE] while
holding [SHIFT] down.
Important Note:
"
" may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
-E47-
Program
Off
4 ---
7 ---
10 ---
5 ---
8 ---
11 ---
6 ---
9 ---
12 ---
Program Playback
/Enter/0–9/Clear/Play Mode
24/2/03, 7:15 PM