Advertisement
High Voltage Power Supply
SAFETY AND INSTALLATION
Document Number: 81234-4.
Issue
Date
Issuing Authority
Checked
Approved
XMPF10N5/24
INSTRUCTIONS
A
23/01/18
I-5650
Tel: +44 (0)1798 873986
Fax: +44 (0)1798 872479
E-mail :
hvsales@spellmanhv.co.uk
Broomers Park, Broomers Hill Lane
Pulborough, W. Sussex, RH20 2RY
Advertisement
Table of Contents
Related Manuals for Spellman XMPF10N5/24
Summary of Contents for Spellman XMPF10N5/24
- Page 1 Tel: +44 (0)1798 873986 Fax: +44 (0)1798 872479 E-mail : hvsales@spellmanhv.co.uk Broomers Park, Broomers Hill Lane Pulborough, W. Sussex, RH20 2RY High Voltage Power Supply XMPF10N5/24 SAFETY AND INSTALLATION INSTRUCTIONS Document Number: 81234-4. Issue Date 23/01/18 Issuing Authority I-5650 Checked...
-
Page 2: High Voltage
SAFETY DANGER HIGH VOLTAGE RISK OF ELECTROCUTION Observe extreme caution when working with this equipment High voltage power supplies must always be connected to protective earth Do not touch connections unless equipment is turned off and the capacitance of both the load and power supply are grounded ... - Page 3 Input and Output Connections ................... 5 Unit Description The XMPF10N5/24 unit consists of one chassis containing the high voltage power supply. The dimensions are 170mm x 70mm x 30mm The unit is designed for operation from 24Vdc ± 10%. The maximum rated input current is 500mA.
- Page 4 Initial Inspection Inspect the package exterior for evidence of damage due to handling in transit. Notify the carrier and Spellman immediately if damage is evident. Do not destroy or remove any of the packing material used in a damaged shipment.
- Page 5 Input and Output Connections The low voltage signal connections are made by a 15 way ‘D’ connector; the pin out is shown below. Pin # Signal Name Range +24V input Power Ground Filament (direct program) Signal ground HV enable Digital input Not used 0 –...
Need help?
Do you have a question about the XMPF10N5/24 and is the answer not in the manual?
Questions and answers