Mechanical Transmission; Clutch / Brake Pedal - Titan TTK550LWM Owner's Manual

TTK550LWM by TITAN
Manual start
7. PULL START HANDLE
To start the engine, take the starter cable handle and give it a
firm tug.
Then put the handle back in its seat, guiding the cable as it
automatically rewinds.
8. ACCELERATOR LEVEL
It regulates the rpm and stops the engine.
The positions are indicated on the plate showing the following
symbols:
«OFF» for switching off the engine
«CHOKE» (if fitted) = cold starting
«SLOW» for minimum engine speed
«FAST» for maximum engine speed
– The «CHOKE» position (if fitted) enriches the mixture so must only be used for the
necessary time for cold starting.
– When moving from one area to another, put the lever in a position between «SLOW»
and «FAST».
– When cutting, go to the «FAST» position.

Mechanical transmission

11. CLUTCH / BRAKE PEDAL

This pedal has a double function - during the first part of its
travel it acts as a clutch, engaging and disengaging drive to
the wheels and in the second part it acts as a brake on the rear
wheels.
It is important not to take too long in using the clutch as this can
cause overheating and damage the transmission belt.
NOTE
When the machine is in movement, keep your foot off the pedal.
Operation
GB
IE
21