View Version; Buffering Functions (Multifunction Type Only) - Panasonic hl-g1 User Manual

Functions

4.4.8.4 View Version

Procedure
1. 2s
2.
3.
4.
5. to display the current firmware version

4.4.9 Buffering Functions (Multifunction Type Only)

Buffering is a function to accumulate measurement data in the built-in memory of the sensor
so that you can load the data to an external control device such as a PC.
A maximum of 3,000 measurement data items can be accumulated. The accumulated data
can be loaded by using the software HL-G1SMI or a serial command (RS422 or RS485)
The software HL-G1SMI (sold separately) helps you to verify the measurement data because
it converts the data into CSV format. CSV files can be displayed graphically, saved, replayed,
and opened in Microsoft Excel.
NOTE

Buffering settings cannot be made via the control panel. All settings need to
be made by serial commands.

To execute buffering, you need to write a program for RS422/485 or use the
software HL-G1SMI.

While measurement data is being buffered, it is not possible to change the
buffering settings. In order to change the buffering settings, you need to
send the stop command.
80
SEN TRONIC
AG
Produkte, Support und Service
Displays the version of the firmware.
7x
3x
Rugghölzli 2
CH - 5453 Busslingen
HL-G1 User's Manual
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com