B Camera Designation Settings (Site) - Sanyo DSR-2108 Instruction Manual

Setup menu settings
B
Camera designation settings (Site)
The connection information registered in the "Connect"
dialog at the time of connection is displayed as a list in the
"Site" list.
Allows the user to add, change, delete the registered
information or set a channel name.
b Registering the additional DVR (Addition)
1
Click "Addition".
The "Addition" dialog is displayed.
2
3
4
5
6
2
Input the information necessary to the connection
such as the address.
The input method is the same as the one used for the
"Connect" dialog at the first connection.
• Site Name: Name of the administrator
• IP Address/Port No: The IP address and port
• Protocol: TCP/UDP
• Password: The network password set in the DVR
63
1
number set in the DVR
3
Select the number of channels on the DVR (4/8/16
CH) using the "CH Mode".
4
Click the channel in the "Channels" list and click
again on the reversed blue display.
The input box is displayed.
5
Input the channel name.
The specified name is displayed on displays such as
the camera video.
Set a channel name for each channel following the
same procedure.
6
Click "OK".
The "Addition" dialog close and the site is added to the
"Site" list.
b Modify the registered content (Modify)
1
Click the site to be modified in the "Site" list.
The line of the selected site is highlighted in blue.
2
Click "Modify".
The "Modify" dialog is displayed.
3
Modifying the registered content displayed in the
dialog.
4
Click "OK".
The "Modify" dialog shuts down and the "Site" list is
updated.
Memo: No channel name is set when connected.
To set channel names use "Modifying registered
content (Modify)".
b Remove a registered site (Remove)
1
Select the site to be removed in the "Site" list.
The line of the selected site is highlighted in blue.
2
Click "Remove".
The "Remove" dialog close and the "Site" is removed
from the "Site" list.
Click [OK] once the above settings are complete.
The content of the settings are confirmed and saved.