F Setting The Send E-Mail - Sanyo DSR-2108 Instruction Manual

NETWORK settings
5
Enter the "USER ID" and "PASSWORD" confirmed
on the DDNS SERVER SET screen and click the
Login button.
The domain name registration screen is displayed.
Enter the "USER ID" and "PASSWORD" in capital
letters.
6
Enter the domain name to be used and click the
Submit button.
The domain name is registered to the DDNS server.
7
Return to the DDNS SERVER SET screen of this
unit and enter the registered domain name.
Select the input location using the control button (}~)
and select a character using the control button ({|).
DDNS SERVER SET
- - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
USER ID XX-XX-XX-XX-XX-XX
PASSWORD XXXX-XXXX-XXXX
LOG
8
Press the ENTER button.
The DDNS settings complete, the screen returns to the
NETWORK screen.
45
ready
F
Setting the SEND E-MAIL
An E-mail can be sent to a specified IP address.
1
Select "SEND E-MAIL" using the control button
({|), select "ON" using the control button (}~)
and press the ENTER button.
The SEND E-MAIL screen is displayed.
SEND E-MAIL
IP NOTIFICATION
EVENT ALARM
MAIL TO
MAIL SERVER
USER
PASSWORD
MAIL FROM
• ON: Enable the sending e-mail function
• OFF: Disable the sending e-mail function
2
Select the following item using the control button
({|) and select the setting using the control
button (}~).
• IP NOTIFICATION:
ON: Does not send a notification E-mail even when
an event alarm is triggered.
OFF: Does not send an E-mail
• EVENT ALARM:
OFF: Does not send a notification E-mail even when
an event alarm is triggered.
ALARM:
A notification e-mail is sent when ALARM
recording is triggered by the sensor connected to
the external alarm input terminal (ALARM IN) of
the unit.
MOTION:
A notification e-mail is sent when MOTION
recording is triggered by a movement detected by
the motion sensor built into the unit.
ALL:
A notification e-mail is sent when a recording is
triggered either by an external alarm or the
built-in motion sensor.
Memo: EVENT ALARM requires setting of ALARM-SET.
(P32)
3
Select the following item using the control button
({|) and set the information, such as the E-mail
address, using the control button ({|}~).
Pressing the EXIT/STOP button returns the screen to
the SEND E-MAIL screen.
OFF
OFF