Sanyo DSR-2108 Instruction Manual page 37

Configuration and function of the Menu settings
b Basic operations of the MAIN MENU
1
Press the MENU button.
The PASSWORD input screen is displayed.
2
Input the "ADMIN PASSWORD" using the channel
selection button and press the ENTER button.
The MAIN MENU screen is displayed.
• "1111" is the factory default setting password.
~
1 10
☞
In DSR-2108, input using channel selection
button 1 - 8.
3
Select the menu using the control button ({|}~).
Example: RECORD
MAIN MENU
LIVE
NETWORK
2% 2009/05/03 09:04:54
:A
PASSWORD
- - - -
CH1
2% 2009/05/03 09:04:54
:A
PASSWORD
* * * *
- - - -
CH1 C
RECORD SYSTEM
HDD SET SERVICE
1
2
4
Press the ENTER button.
The RECORD menu is displayed.
RESOLUTION
CHANNEL
FRAME RATE
QUALITY
RECORDING
MOTION ZONE
MOTION SENSITIVITY
ALARM RECORDING
PRE RECORD
POST EVENT RECORD
AUDIO
TIMER SET
REAL-TIME REC SET
5
Select an item using the control button ({|) and
set the details using the control button (}~).
If a different screen is available for the settings, select
the item, press the ENTER button and set the settings.
RESOLUTION
CHANNEL
FRAME RATE
QUALITY
RECORDING
MOTION ZONE
MOTION SENSITIVITY
ALARM RECORDING
PRE RECORD
POST EVENT RECORD
AUDIO
TIMER SET
REAL-TIME REC SET
6
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the
live screen.
Memo: The contents of the settings are saved when leaving
the menu setting screen.
Even if the power is turned off the settings content
are retained.
6
2 5
RECORD
FULL
1 1
1 ips
NORMAL
CONTINUOUS
FULL ZONE
9
-- -- -- --
OFF
5 SECONDS
OFF
RECORD
FULL
1 1
1 ips
NORMAL
CONTINUOUS
FULL ZONE
9
-- -- -- --
OFF
5 SECONDS
OFF
30