Table of Contents
Advertisement
LCD
When used in
monitor
cold weather,
and
image seems to
viewfinder
leave traces as
it moves.
Images
displayed
contain some
red, blue, and
green dots, or
there are black
spots visible.
Area around
LCD monitor is
warm.
No image
appears during
shooting.
No playback
image appears.
Viewing
Focus does not
images
work.
163
English
Problem
Effects of the liquid
crystals.
Normal effect due to
internal structure.
Lens cap is attached.
CAMERA/PLAY switch
is set to "CAMERA."
Subject is too close.
Focus is not set
properly.
Digital disk camera
moved when shutter
release button was
pressed.
Focus does not lock.
Shutter speed is too
slow.
Lens is dirty.
Cause
Not a malfunction.
Such spots that appear
in the monitor only
appear in the monitor
and will not be
recorded with images.
Not a malfunction.
Remove lens cap.
Turn CAMERA/PLAY
switch to "PLAY."
If subject is between 3
to 60 cm away, set
focus to 8 (macro
focus) or 5 (total
range focus); if subject
is farther than 60 cm
away, set focus to 6
(normal focus) or 5
(total range focus)
Hold digital disk
camera correctly and
slowly press shutter
release button halfway
to lock focus. Then
press shutter release
button fully down.
When capturing
images with slow
shutter speed, use
tripod to stabilize digital
disk camera and press
shutter release button
with remote control.
Clean lens.
Reference
Action
page
18
46
72, 90
49, 51
95
14
Advertisement
Table of Contents
