Table of Contents
Advertisement
Setting the exposure metering
Your digital disk camera is capable of two types of exposure metering: by dividing up the screen
and calculating the total amount of light by adding up each division (matrix metering) or by
measuring the amount of light in the central portion of the screen only (center-weighted
metering). Your digital disk camera is initially set to use matrix metering for determining the
proper exposure settings. To have your digital disk camera use center-weighted metering, make
the proper settings by following the procedure below.
Preparation
œ Turn the mode selector dial to ê to display the Option Screen.
1
Press the arrow button to select the camera icon ò
and press the SET button.
œ The Camera Setting Screen appears.
2
Press j or l on the arrow button to select the
exposure metering menu.
œ The exposure metering menu appears.
3
Press c on the arrow button to select B or J.
For matrix metering: Select B
For center-weighted metering: Select J
4
Press the SET button.
œ This completes the exposure metering setting.
œ To return to the Option Screen, press the MODE
button.
113
English
Option Screen
Exposure measurement menu
Camera Setting Screen
Advertisement
Table of Contents
