Table of Contents
Advertisement
Setting the remote control operation
Follow the procedure below to set whether or not you will use the remote control.
Preparation
œ Turn the mode selector dial to ê to display the Option Screen.
1
Press the arrow button to select the camera icon ò
and press the SET button.
œ The Camera Setting Screen appears.
2
Press j or l on the arrow button to select the
remote control menu.
œ The remote control menu appears.
3
Press c on the arrow button to select the desired
remote control mode.
To use the remote control: Select E
To not use the remote control: Select D
4
Press the SET button.
œ This completes the setting of whether or not you will
use the remote control.
œ Refer to page 36 for information regarding the use of
the remote control.
œ To return to the Option Screen, press the MODE
button.
NOTE
œ The power save function (see page 35) will differ depending on the remote control menu
setting.
E: If the digital disk camera is left for the specified amount of time, it enters the power save
mode and then turns off.
D: If the digital disk camera is left for the specified amount of time, it turns off without
entering the power save mode.
OPTIONAL
FUNCTIONS
Option Screen
PREFERENCES
REMOTE
Remote control menu
Camera Setting Screen
English
124
Advertisement
Table of Contents
