Table of Contents
Advertisement
Problem
Viewing
Image is too
images
dark.
Image is too
bright.
Color for
images
captured
indoors are not
correct.
Video clip
image flickers.
Cause
Flash was blocked by
finger or other object.
Subject was too far
away.
Subject was lit from
behind.
Not enough light.
Forced flash is being
used.
Subject is too bright.
Shutter speed is slower
than proper value (for
shutter speed priority
AE).
ISO sensitivity is not
set correctly.
Due to ambient lighting. Capture image using
White balance is not
set correctly.
Video clip was filmed
under fluorescent
lighting.
Action
Hold digital disk
camera correctly and
make sure flash is not
obstructed.
Capture images inside
flash range (within 2.8
meters).
Use forced flash mode.
Use exposure
correction.
Capture using spot
sample AE setting.
Use exposure control
setting.
Use ISO sensitivity
setting.
Set to flash mode other
than forced flash.
Change camera angle
or use other means to
decrease subject
brightness.
Use exposure
correction.
Capture using spot
sample AE setting.
Adjust shutter speed to
proper value.
Set ISO sensitivity to
proper value.
forced flash mode.
Set white balance
correctly.
Set shutter speed to
1/100.
Reference
page
49
75
76
87
93
92
114
76
87
93
94
114
76
96
94
164
English
Advertisement
Table of Contents
