49
Operating & Maintenance Instructions
C1.3
Collecting Data Using a PDA
The PDA must be loaded with relevant A1100, IrDA meter reading
software. To read the data the PDA should be held pointing reasonably
square to the IrDA port at a distance of approximately 10cm to 30 cm.
To read the meter data, on the PDA:
Press Start
Select Programs
Select IrDA Meter Reader
Point the PDA at the A1100 IrDA port
The PDA will read the meter data.
The following data is collected by the PDA
Import/Export
Security
Status
Meter ID
Errors