Rj12 Connector; Alarm Inputs - Eaton RI-2 Installation Manual

RJ12 Connector

An RJ12 connector is also fitted, for factory &
commissioning use.
Note: It is not recommended to connect to this
port for normal operation.
RJ12 Connector
located on the base of the unit
Eaton - Lighting Systems

Alarm Inputs

The default action for the alarm inputs is for
all outputs to switch on. These inputs are
designed for integration with emergency
control devices and building management
systems, using volt-free switch inputs.
The default action for the alarm inputs is for all
mapped DMX channels to output 255, digital
outputs drive high, and relay outputs close.
They will then remain in this state, regardless
of any other command received, until both
alarm inputs are open again.
Function
Alarm 1
0V
N/A
N/A
iLight Product Series - RI-2 73-897-00 IM8791 Iss 5
Function
Alarm 2
0V
N/A
N/A
9