Capacity Check; Utility; Format Fat32; Format Exfat - Addonics Technologies UDFH15-C User Manual

Compact USB Duplicator controller user manual

4. Capacity Check

This command allows to verify the device capacity. It can detect the actual capacity of
devices within 3 seconds.
4. Capacity Check
Ready device: 8
Source and target devices inserted

5. Utility

5.1. Format FAT32

This option allows to format the target device to FAT32 file format. It will not format the
source device, avoiding accidently erasing the original data content. User will be asked if it is
sure to format the target devices before the Format process starts.
[Utility]
1. Format FAT32

5.2. Format exFAT

This option allows to format the target device to exFAT file format. It will not format the
source device, avoiding accidently erasing the original data content. User will be asked if it is
sure to format the target devices before the Format process starts.
[Utility]
1. Format exFAT
Check：8
P：0 F：0
ENT
％
Display progress status
Sure to format?
Yes
ENT
Use ▲or ▼ to select option
Result:
Pass：7 Fail：0
Final Result
Sure to format?
Yes
Use ▲or ▼ to select option
Result:
Pass：7 Fail：0
Final result
Page 9 of 17
Result:
Pass：8 Fail：0
Final result
Format：7
ENT P：0 F：0
Display progress status
Format：7
P：0 F：0
Display progress status
0%
0%