Asynchronous Mode; Smaller Target; Unknown Format - Addonics Technologies UDFH15-C User Manual

Compact USB Duplicator controller user manual
duplicator will copy the whole 8GB of content to target device.
7. Setup
Main menu
[Copy Area]
Whole Media
▼
Use▲▼to change option
6.2. Asynchronous
This option allows to enable or disable Asynchronous Mode. By default the
Asynchronous Mode is disabled. Please refer to Chapter III for the detail of
operation on Synchronous and Asynchronous Mode.
[Setup]

2. Asynchronous Mode

6.3. Smaller Target

If the capacity of the target device is smaller than the source device, the duplicator will
partly copy or cannot copy. Partly Copy is the default setting.
[Setup]
3. Smaller Target

6.4. Unknown Format

This option allows you to Copy or Skip unknown format. If option Skip is selected here, the
unknown format from source will not be copied during copy process.
is the default setting.
[Setup]
4. Unknown Format
[Setup]
1. Copy Area
ENT
Copy Area menu
Mode
Page 13 of 17
[Copy Area]
System And Files
ENT
[Asynchronous Mode]
Disable
ENT
Use ▲or ▼ to select
[Smaller Target]
Partly Copy
ENT
Use ▲or ▼ to select
[Unknown Format]
Copy
ENT
Use ▲or ▼ to select
Sub menu
Copy unknown format