Montigo RP620 Series Installation & Maintenance Manual page 26

STEP 7: From LGS58, Place log 5 on top of the end of the right log
from LGS57 and cross the burner to log 3, place log 6 on top of the
end of log 2 and cross the burner to log 3 see figure 12j.
6
STEP 8: Place log 6 from LGS58 on top of log 1 near the middle of
the burner. Cross log 6 on top p of the first log 6 installed in step 5.
See figure 12k.
26
5
3
Figure 12.j
6
Figure 12.k
STEP 9: Place the logs from LGS59 in any configuration you find
pleasing over top of the light tray. Be sure to install the inner glass
first.
1 2 3
Installation
4 5 6
Figure 12.k
Figure 12.l
XG0777 - 180525