Direct Wall Mounting - Sanyo CLT-E30 Instruction Manual

UP383BA_0.book Page 18 Thursday, May 26, 2005 10:48 AM
GETTING
STARTED
6) Align the mounting slots on the base with the mounting posts on the wall. Then push in
and down until the phone is firmly seated.
Important:
DO NOT use an AC outlet controlled by a wall switch.

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could
cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive
lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the
wall material where the base unit will be placed.
[ E 1 8 ] G et t in g St ar t e d