UP383BA_0.book Page 15 Thursday, May 26, 2005 10:48 AM
GETTING
STARTED
• Use only the supplied SANYO AC adapter. Do not use any other AC adapter.
Notes:
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
Important:
• Place the power cord so that it does not create a trip hazard or where it could become chafed and
create a fire or electrical hazard.
• After installing the battery pack in the handset, charge your handset at least 15-20 hours before
plugging into the phone line.
4) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE jack
and to a telephone outlet.
Tip:
If your telephone outlet isn't modular, contact your
telephone company for assistance.
G e t t i n g S t a r t ed [ E 1 5 ]