Table of Contents
Advertisement
UP383BA_0.book Page 23 Thursday, May 26, 2005 10:48 AM
GETTING
STARTED
Global Setup
If you change one of the Global settings, you change the settings for all additional
handsets. Only one handset can change Global settings at a time.
Submenu option
Day & time
Set the day and time of your display (see page E30).
Set the Caller ID on Call Waiting (CIDCW) setting. CIDCW performs the same as regular
CIDCW (Default is
Caller ID on a call waiting number (see page E31). Call Waiting Deluxe allows you to
CW on/CWDX off)
handle call waiting calls in seven different ways (see page E64).
Store or edit the area code. If you enter a 3-digit area code number in the"Area Code"
option, your local area code does not appear in the Caller ID message. For calls received
Area Code
from outside your local area code, you will see a full 10-digit number (see page E31).
Note: If your calling area requires 10-digit dialing, do not program this option.
Dial Mode
Set the dial mode to tone or pulse (see page E32). Most phone systems use tone dialing,
(Default is tone)
which sends a DTMF tone through phone line.
Copy Phonebook
To transfer the phonebook data stored in one handset to another handset (see page E32).
(For Multi Handsets)
Voice Mail Tone
If your service does not support SDT message signal, set your VMWI (Visual Message Waiting
(Default is on)
Inculcator) not to detect SDT message signal (see page E33).
Description
G e t t i n g S t a r t ed [ E 2 3 ]
Advertisement
Table of Contents
