UP383BA_0.book Page 24 Thursday, May 26, 2005 10:48 AM
GETTING
STARTED
System Reset
System Reset is used to clear the handset's ID from the main base unit, or the base ID from the
handset.
Submenu option
Clear the handset ID from the base. Use this option, for example, when you change the
Deregister HS
digital security code (see page E34).
Clear the base ID. Use this option, for example, if you wish to deregister the base to use
Replacing Base
the handset with another base of the CLT-E series (see page E34).
[ E 2 4 ] G et t in g St ar t e d
Description