Table of Contents
Advertisement
UP383BA_0.book Page 21 Thursday, May 26, 2005 10:48 AM
GETTING
STARTED
Handset Setup
The following submenu options must be set separately for each handset.
Submenu option
Edit Voice Mail
Program or delete the voice mail access number (see page E27).
Ringer Tones
Adjusting the ringer tone (the sound your phone makes when ringing)
(Default is Flicker)
(see page E28).
Set the distinctive ring (see page E28). "Distinctive Ringer" allows you to preset
memory locations with a designated ring tone. When an incoming call is received and
the Caller ID information matches the information in one of the memory locations,
Distinct. Ring
the distinctive ring that has been stored for that particular Caller will sound. If you
(Default is on)
have set multiple memory locations with distinctive rings, switching the setting to
"Distinctive Off" will result in no distinctive ringing. All incoming calls will have a
normal ring tone. Switching to "Distinctive On" will activate all programmed
distinctive ring memory locations.
Allows you to answer the phone without pressing
Automatic Talk
the Automatic Talk is set to on, simply remove the handset from the cradle and the
(Default is off)
phone automatically answers the call (see page E29).
Allows you to answer the phone without pressing
Anykey Answer
the Anykey Answer is on, you can answer a call by pressing any number key,
(Default is off)
*
/tone/
Description
talk/flash
talk/flash
, or #/
on the handset (see page E29).
G e t t i n g S t a r t ed [ E 2 1 ]
speaker
or
. When
speaker
or
. When
Advertisement
Table of Contents
