Drawers And Pull-Out Shelves; Installation Of The Swing Or Sliding Door; Swing Door - GARANT Shelf combination units User Manual

5.4.

Drawers and pull-out shelves

▶
▶
DE
▶
Important note
For the drawers and pull-out shelves to function correctly, a 100 % levelling
of the basic structure is required.
EN
FR
6.

Installation of the swing or sliding door

6.1.

Swing door

IT
The elongated holes in the storage shelves and baseframe help to align the
doors properly.
▶
Important note
Do not tighten the screws, only align using the elongated holes and screw
in after hanging the doors.
ES
▶
▶
▶
40
Release telescopic slides.
Install drawers and pull-out shelves.
Secure the brackets of the telescopic slides again.
The lower traverse has longer hinge sleeves (e)!
Screw these to the storage shelves (c).
Right support: insert into the base provided on the lower traverse (II).
Left support: insert into the base provided on the lower traverse (III).
Upper traverse: insert short sleeves (b) into the base provided and screw
onto the storage shelf (IV).