Conditions For Correct Installation Of Shelves; Installation Of The Base Unit; Initial Phase - GARANT Shelf combination units User Manual

4.2.

Conditions for correct installation of shelves

Sufficient loading capacity of the ground.
▶
Ready-to-install foundation / screed.
▶
Ensure the ground anchors are stable:
▶
Strength of concrete floor should be at least 180 mm
(Minimum 200 mm from the edge)
Resistance of the concrete should be at least B25, with the top layer 35
mm thick.
Important note
All upright frames of the shelves must be secured using the ground anchors
supplied.
4.3.

Installation of the base unit

4.3.1

Initial phase

Insert mounting hooks (a) into the top and bottom holes (c), only screw
▶
screws (M6) (b) in by a few convolutions.
On the bottom drawer runners (e, f ), remove the plastic lock (d) and
▶
disassemble the runners.
This will make it easy to insert the baseframe.
www.hoffmann-group.com
DE
EN
FR
IT
ES
33