Veris U3 Operating Instructions Manual page 34

Figure 9.
Note: You may have to bleed the air from the system to allow the pump to properly prime. This is
accomplished by removing one of the wash hoses by releasing the auto-lock fitting. Simultaneously push
down on lock collar and pull up to release hose. Press manual wash switch until pump is primed, and push
hose back into auto-lock fitting. (Figure 10)
Figure 10.
Tank valve
Forward -- on
(shown)
Vertical – off
Rearward -- drain
Auto -lock
Lock collar
5-7
Pub# OM20-U3-pH