Connection To Power Unit - Veris U3 Operating Instructions Manual

Connection to Power unit

The U3 is easily connected to a UTV or small tractor.
Electronic connections are the large red and black main power leads, and the GPS com cable.
1) Connect the red power lead to positive post of battery and black to negative. The disconnect at the
front of the implement allow quick disconnection from the unit, leaving the power lead on the towing
unit.
2) The GPS comm cable connects to the Veris-supplied GPS or to your existing GPS source.
3) The remote control for the electro-hydraulic lift is routed to the operator location for raising and
lowering the unit.
Figure 3
GPS/com
Cable
Main
power
Remote
Control
3-2
Pub# OM20-U3-pH