User Manual - Clearaudio Absolute phono inside User Manual

User manual / Bedienungsanleitung

User manual ............................................. 2 - 6

Bedienungsanleitung ............................... 7 - 10
Dear Clearaudio customer,
The Clearaudio absolute phono inside
The circuit design is identical to the
Due to a new breakthrough-technology with true symmetrical amplification circuity, the signal to
noise ratio is improved by approximately ten decibels across the entire audio bandwidth.
absolute phono inside
The
The sophisticated power supply is located in a separate chassis to keep mains-borne interference
to a minimum. No relays or coupling capacitors are used in the signal path as they would otherwise
degrade the sound. In addition, hand-selected state-of-the-art non-magnetic Clearaudio Silver
Glimmer capacitors are used at key areas throughout the circuit where they further contribute to
the exceptional sound quality.
absolute phono inside
The
and one pair of unbalanced RCA phono inputs (L/R) as well as a pair of balanced XLR ouputs (L/R).
absolute phono inside
The
'Mute' and 'Standby' modes.
absolute phono inside
The circuitry of the
cartridge from any manufacturer. This is ensured due to the sophisticated current amplification
circuit which eliminates the need to set the correct load resistance and load capacitance.
The optimum operating condition is always set automatically.
Clearaudio wish you the greatest of enjoyment with your new
Do not expose the equipment to rain or moisture.
Do not handle the mains lead with wet hands.
No naked flame sources, such as lighted candles, should be placed on the equipment.
CE-MARKIERUNG
Copyright
Recording and playback of any material may require consent. For further information refer to the
following:
- Copyright Act 1956
- Dramatic and Musical Performers Act 1958
- Performers Protection Acts 1963 and 1972
- Any subsequent statutory enactments and orders
2
is a true symmetrical circuit moving coil phonostage.
absolute phono
is designed and constructed without compromise.
features two pairs of phono inputs: one pair of balanced XLR inputs (L/R)
is equipped with a bright blue single multi-function switch for 'On', 'Off',
is designed to work perfectly with any moving coil
Warning
in-headshell amplification version.
absolute phono inside.
© clearaudio electronic GmbH, 2018/05