Kubota WG752 E3 Applications Manual page 70

1. Final assembler Information
Final assembler's Name :
Equipment Model Name :
2. Subject Regulations and Fuels (Mark "X" or Check the box(es) below)
Regulations :
Fuels :
3. Engine Information (Fill when adopted)
Engine Model Name :
3.1 Fuel System and Intake System Specification
For OEM specific engine, attach the drawing or the photo which shows the status of installation on page 5.
Part Name
Carburetor
Throttle Body
Mixer
Air Cleaner Flange
Inlet Hose 1
Inlet Hose 2
Inlet Hose 3
Air Cleaner
Air Cleaner Hose 1
Air Cleaner Hose 2
Air Cleaner Hose 3
Gas Hose
3.2 Exhaust System Specification
For specification engine model, attach the drawing or the photo which shows the status of installation on page 6.
Part Name
Spacer
Catalytic Converter
Catalytic Muffler
4. Emission Performance Result
TO BE COMPLETED BY KUBOTA
Test Location :
Engine Serial No. :
4.1 Test Result
HC+NO
X
CO
* If there are Intake, Fuel or Exhaust system changes at Customer's Product, Emission of application must be rechecked.
5. Reporter
Reporter (Items 1 ~ 3) :
Reporter (Item 4) :
November 11, 2010
Emission Performance Check Sheet
(Category: Engine Displacement Less than 1 Liter)
EPA CARB
Gasoline
KUBOTA p/n OEM p/n
*Final assembler to mark " " to the parts to install.
KUBOTA p/n OEM p/n
*Final assembler to mark " " to the parts to install.
(Passed: OK, Failed: X, Not Subject: -)
Standard Gasoline
≤
g/kWh
≤
g/kWh
2002/88EC CANADA
LPG Natural Gas
Engine Code :
Delegated Assembly*
Delegated Assembly*
Test Date :
Test Mode :
LPG
Date :
Date :
other : "Fill in the name of regulation"
Remarks
select from KBT approved parts
select from KBT approved parts
select from KBT approved parts
select from KBT approved parts
Hose between Air Cleaner flange
and Air Cleaner
Hose to attach Air Cleaner inlet
Hose to attach between mixer,
vaporizer, and regulator
*Length:Must be 300+/-20mm
Remarks
comply with installation instruction
select from KBT approved parts
select from KBT approved parts
Natural Gas
4